PC(聚碳酸酯)EXL6013/沙伯基礎(SABIC)

                    PC(聚碳酸酯)EXL6013/沙伯基礎(SABIC)_價格_物性_圖片_UL黃卡

                    公司主營產品:耐高溫塑料,耐低溫塑料,耐磨塑料,耐熱塑料,耐寒塑料,防火塑料,加纖塑料,醫療級/食品級塑料,抗紫外線塑料,紅外線穿透塑料...

                    全國24小時銷售熱線:

                    0769-83023208

                    產品詳情

                    ?            SABIC(沙伯基礎創新塑料)LEXAN PC EXL6013是專為要求具有高沖擊性能和優于標準聚碳酸酯的耐化學性的應用而開發的。

                    以下是SABIC沙伯基礎創新Lexan PC EXL6013中英文物性表資料:

                    PROPERTIES TYPICAL VALUESUNITSTEST METHODS
                    MECHANICAL



                    Taber Abrasion, CS-17, 1 kg
                    10mg/1000cySABIC method
                    Tensile Stress, yield, 50 mm/min
                    55MPaISO 527
                    Tensile Stress, break, 50 mm/min
                    60MPaISO 527
                    Tensile Strain, yield, 50 mm/min
                    7%ISO 527
                    Tensile Strain, break, 50 mm/min
                    100%ISO 527
                    Tensile Modulus, 1 mm/min
                    2100MPaISO 527
                    Flexural Stress, yield, 2 mm/min
                    80MPaISO 178
                    Flexural Modulus, 2 mm/min
                    2150MPaISO 178
                    Ball Indentation Hardness, H358/30
                    90MPaISO 2039-1
                    IMPACT



                    Izod Impact, unnotched 80*10*3 +23°C
                    NBkJ/m2ISO 180/1U
                    Izod Impact, unnotched 80*10*3 -30°C
                    NBkJ/m2ISO 180/1U
                    Izod Impact, notched 80*10*3 +23°C
                    70kJ/m2ISO 180/1A
                    Izod Impact, notched 80*10*3 -30°C
                    60kJ/m2ISO 180/1A
                    Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm
                    75kJ/m2ISO 179/1eA
                    Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm
                    70kJ/m2ISO 179/1eA
                    Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm
                    NBkJ/m2ISO 179/1eU
                    Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm
                    NBkJ/m2ISO 179/1eU
                    THERMAL



                    Thermal Conductivity
                    0.2W/m-°CISO 8302
                    CTE, 23°C to 80°C, flow
                    7.E-051/°CISO 11359-2
                    CTE, 23°C to 80°C, xflow
                    7.E-051/°CISO 11359-2
                    Ball Pressure Test, 125°C +/- 2°C
                    PASSES-IEC 60695-10-2
                    Vicat Softening Temp, Rate B/50
                    138°CISO 306
                    Vicat Softening Temp, Rate B/120
                    140°CISO 306
                    HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm
                    131°CISO 75/Be
                    HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm
                    122°CISO 75/Ae
                    PHYSICAL



                    Mold Shrinkage on Tensile Bar, flow
                    0.6-0.8%SABIC method
                    Density
                    1.2g/cm3ISO 1183
                    Water Absorption, (23°C/saturated)
                    0.35%ISO 62-1
                    Moisture Absorption (23°C / 50% RH)
                    0.15%ISO 62
                    Melt Volume Rate, MVR at 300°C/1.2 kg
                    5cm3/10 minISO 1133
                    ELECTRICAL



                    Volume Resistivity
                    >1.E+15Ohm-cmIEC 60093
                    Surface Resistivity, ROA
                    >1.E+15OhmIEC 60093
                    Dielectric Strength, in oil, 3.2 mm
                    17kV/mmIEC 60243-1
                    Relative Permittivity, 1 MHz
                    2.7-IEC 60250
                    Dissipation Factor, 50/60 Hz
                    0.001-IEC 60250
                    Dissipation Factor, 1 MHz
                    0.01-IEC 60250
                    Comparative Tracking Index
                    175VIEC 60112
                    Relative Permittivity, 50/60 Hz
                    2.7-IEC 60250
                    FLAME CHARACTERISTICS



                    Glow Wire Flammability Index 850°C, passes at
                    1mmIEC 60695-2-12
                    Injection Molding



                    Drying Temperature
                    120°C
                    Drying Time
                    2-4hrs
                    Maximum Moisture Content
                    0.02%
                    Melt Temperature
                    290-320°C
                    Nozzle Temperature
                    280-310°C
                    Front - Zone 3 Temperature
                    290-320°C
                    Middle - Zone 2 Temperature
                    280-310°C
                    Rear - Zone 1 Temperature
                    270-300°C
                    Hopper Temperature
                    60-80°C
                    Mold Temperature
                    80-120°C



                    上一篇:PC(聚碳酸酯)EXL5429/沙伯基礎(SABIC)

                    下一篇:PC(聚碳酸酯)EXL1444/沙伯基礎(SABIC)

                    欣隆全塑膠
                    相關產品

                    Related products

                    推薦產品
                    厕所里我被民工男同囗交